Table of Contents
Advertisement
Sytronix SvP 7030 IMC
16 / 186
Product and technology-related safety instructions
Bosch Rexroth AG
Penetrating water and humidity!
WARNING
In case of use in humid or wet environments, water or
humidity may penetrate at electrical plug-in connectors
or hydraulic components. This case may lead to malfunc-
tion of the pump and to unexpected movements in the
system which may result in personal injury and damage
to property.
−
Only use the Sytronix system within the intended IP
protection class or lower.
−
Ensure before the installation that all seals and caps
of the plug-in connections are present and intact.
Dewing!
WARNING
If the device temperature is lower than the ambient tem-
perature, dewing may occur, which can lead to malfunc-
tion and thus to a risk of injury.
−
Comply with the technical data and ambient condi-
tions specified in the product documentation.
−
Set cooling units with set temperature to the max-
imum shop floor temperature, not lower!
−
Set cooling units with adjusting temperature setting
so that the temperature inside the control cabinet
is not lower than the ambient temperature. Set the
temperature limitation to the maximum shop floor
temperature!
−
Use exclusively well sealed control cabinets to rule
out dewing caused by incoming warm and humid
ambient air.
−
If control cabinets are operated with the doors open
(commissioning, repairs, etc.), make sure that after
the doors were closed, the drive controllers can at no
time be cooler than the air in the control cabinet. For
this reason, provide for sufficient circulation in the
control cabinet.
−
Observe functional safety according to EN ISO
13849.
Health-damaging hydraulic fluid!
WARNING
Risk of intoxication and injury! Contact with hydraulic
fluids causes damage to health (e.g. eye injuries, skin
damage, poisoning by inhalation and swallowing).
−
Always check the lines for wear and damage before
any commissioning.
−
Wear protective gloves, goggles and suitable work
clothing.
−
If nevertheless hydraulic fluid comes into contact
with the eyes or penetrates the skin, consult a doctor
immediately.
−
When handling hydraulic fluids, strictly observe the
safety notes of the hydraulic fluid manufacturer.
RE 62312-B, 03.2022
Advertisement
Table of Contents
