Table of Contents
Advertisement
5 V voltage supply
Table 116: 5 V voltage supply
Datum
Voltage for encoder supply
Output current
Resolver voltage supply
Table 117: Resolver encoder supply
Datum
AC output voltage VCC_Resolver
(peak-peak value)
Output frequency sine
Output current (peak value)
Output current (rms value)
Encoder cable length
Use lines with the same line cross section for encoder supply.
Allowed encoder cable length for 12 V encoder systems
Preconditions:
● The cross section of the supply voltage lines is at least 0.5 mm
● The minimum allowed supply voltage at the encoder is 10 V
Fig. 58: Maximum allowed encoder cable lengths for 12 V encoder systems depending on the line
cross-section at 10 V supply voltage
I [mA]
Encoder current consumption
l [m]
Cable length
0.5 mm
; 1.0 mm
Line cross sections
2
2
RE 62312-B, 03.2022
Connecting the Sytronix system SvP 7030 electrically
1) The sum of the power consumptions of all connected encoder systems
1) The sum of the power consumptions of all connected encoder systems
Sytronix SvP 7030 IMC
Unit
min.
typ.
V
5.0
mA
should not exceed 12 W.
Unit
min.
typ.
V
8.3
kHz
mA
mA
should not exceed 12 W.
147 / 186
max.
5.25
500
1)
max.
10
12
8
60
1)
40
1)
2
Bosch Rexroth AG
Advertisement
Table of Contents
