Bosch rexroth Sytronix SvP 7030 IMC Operating Manual page 14

Sytronix SvP 7030 IMC
14 / 186
Product and technology-related safety instructions
Bosch Rexroth AG
Sytronix system falling down!
WARNING
Sytronix systems are heavy. When improperly handled,
they can fall down and cause severe injuries and
crushing, because the parts can be, for example, sharp-
edged, heavy, oily, loose or bulky.
−
Transport the Sytronix system using suitable lifting
gear at the points provided for this purpose.
−
Ensure a stable position during transport to the place
of installation.
−
Wear personal protective equipment when handling
the Sytronix system.
−
Comply with the national laws and regulations
regarding occupational health and safety for trans-
porting/handling.
Electromagnetic interference!
WARNING
Frequency converters can be disturbed by interference
emitted by the machine. This can cause malfunction,
which can lead to severe injuries.
−
Use only devices, connecting elements and electrical
control cables that comply with the EMC Directive.
−
If required, install shielding elements.
−
Keep a sufficient distance to sources of radiated dis-
turbance.
−
Observe the EMC limit values and notes on EMC for
the electrical components of the Sytronix system.
Electromagnetic radiated interference!
WARNING
Electrical components of the Sytronix assemblies may
emit electromagnetic interference. This can cause mal-
function, which can lead to severe injuries.
−
Keep a sufficient distance to sources of radiated dis-
turbance.
−
If required, install shielding elements.
−
Observe the EMC limit values and notes on EMC for
the electrical components of the Sytronix system.
Improper mounting!
WARNING
Mounting of hydraulic components using mounting
screws of reduced strength, improper mounting or
mounting with insufficient stability may cause the
hydraulic components to become loose and fall down.
Consequently, hydraulic fluid may leak and lead to
personal injuries and/or damage to property. Heavy
hydraulic components may cause bruises or fatal injury.
−
Completely mount hydraulic components according
to the
mounting aids.
−
Mount the Sytronix system at places that are suitable
to bear the weight of the system.
−
Observe the specified mounting and installation
notes and observe the given tightening torques and
bolt strengths.
−
Check fixing devices regularly during operation.
mounting specifications using suitable
RE 62312-B, 03.2022