Bosch rexroth Sytronix SvP 7030 IMC Operating Manual page 78

Sytronix SvP 7030 IMC
78 / 186
Connecting the Sytronix system SvP 7030 electrically
When using mains contactors of utilization category AC-1, observe the conven-
tional thermal continuous current I
dimensioning the mains contactor.
The required minimum conventional thermal continuous current I
the sum of the nominal currents Σ I
Control circuit for the mains connection
Fig. 36: Control circuit for the mains connection
*
Bb
CNC Lag error message of control unit
F1
F3
Bosch Rexroth AG
Optional
Bb relay contact
Fuse of power supply
Fuse of 24 V power supply unit
(see data sheet of mains contactor) when
th
of all connected drive controllers.
LN
results from
th
RE 62312-B, 03.2022