Table of Contents
Advertisement
B
Specifications
The specifications presented here depend on the conditions in individual laboratories. Refer
to the ACQUITY
Service organization for additional information about specifications.
B.1
System specifications
Table B–1:
Feature
Operating flow rate range
Maximum operating pressure and
maximum flow rate
ABPR
Unattended operation
Liquid CO
2
Table B–2:
Feature
External control
External communications
Event inputs/outputs
®
2®
UPC
System Site Preparation Guide, or contact the Waters
2
ACQUITY UPC
system specifications
Instrument control specifications
Specification
Empower
Ethernet interfacing via RJ45 connection to host PC
Rear panel contact closure, TTL inputs, outputs, or both
November 16, 2016, 715004521 Rev. C
Specifications
0.010 to 4.000 mL/min, in 0.001-mL increments.
3.25 mL/min up to 41,369 kPa (413 bar, 6000 psi).
4 mL/min, to a pressure of 29,303 kPa (293 bar,
4250 psi).
Range: 10,000 to 400,000 kPa (100 to 400 bar, 1450 to
5801 psi)
Noise: < ± 0.5 bar
Leak sensors, full 96-hour diagnostic data display
through the console software
Minimum purity level of 99.97%
®
software or MassLynx
Page 93
®
Technical
®
software
Advertisement
Table of Contents
