Audience And Purpose; Calibrating - Waters ACQUITY UPLC I-Class IVD System Manual

Symbol

Audience and purpose

This guide is intended only for professionally trained and qualified laboratory
personnel who install, operate, and maintain ACQUITY UPLC I-Class IVD
system modules. It gives an overview of the system's technology and
operation.
Intended use of the ACQUITY UPLC I-Class IVD system
The Waters ACQUITY UPLC I-Class IVD system is CE-marked
according to the European Union In Vitro Diagnostic Device
Directive 98/79/EC.
The ACQUITY UPLC I-Class IVD system is a general purpose in vitro
diagnostic instrument used to quantify and qualify of a wide variety of
compounds in biological sample matrices. The system is intended to be used
only by qualified operators.

Calibrating

To calibrate LC systems, follow acceptable calibration methods using at least
five standards to generate a standard curve. The concentration range for
Definition
Confirms that a manufactured product complies
with all applicable United States and Canadian
safety requirements
Consult instructions for use
Electrical and electronic equipment with this
symbol may contain hazardous substances and
should not be disposed of as general waste.
For compliance with the Waste Electrical and
Electronic Equipment Directive
2012/19/EU, contact Waters Corporation for the
correct disposal and recycling instructions.
For in vitro diagnostic use
July 7, 2014, 715003736IVD Rev. C
(WEEE)
vii