Safety And Handling - Waters ACQUITY UPLC I-Class IVD System Manual

To submit a Connections Insight request:
1. Select Troubleshoot > Submit Connections Insight request.
2. In the Connections Insight Request dialog box, type your name,
telephone number, e-mail address, and a description of the problem.
3. Click Submit, and allow approximately 5 minutes to save the service
profile.
Result:
forwarded to Waters customer support for review.
Saving a service profile or plot file from the Instrument Console can
Tip:
require as much as 150 MB of file space.

Safety and handling

Bear in mind the following safety considerations when performing
maintenance procedures on the mass spectrometer:
Warning:
compounds, or their residues, wear clean, chemical-resistant,
powder-free gloves when handling the components.
Warning:
when handling solvents, changing tubing, or operating the instrument.
Know the physical and chemical properties of the solvents used (see the
Material Safety Data Sheets for the solvents in use).
Warning:
The panels cover components that are serviceable only by Waters
technicians.
Warning:
Standby mode before beginning any maintenance operation.
Warning:
spectrometer source are not hot before working on them.
Caution:
the mass spectrometer, ensure that the following criteria are met:
A .zip file containing your Connections Insight profile is
To avoid personal contamination with biohazards, toxic
To prevent injury, always observe Good Laboratory Practice
To avoid electric shock, do not remove the instrument's panels.
To avoid electric shock, ensure that the instrument is in
To avoid burn injuries, ensure that the probe and mass
When performing maintenance inside the source enclosure of
July 7, 2014, 715003736IVD Rev. C
Safety and handling
47