Table of Contents
Advertisement
To release the FlexCart floor lock brake:
Release the cart by depressing the brake release bar located at the front of the
cart.
Moving the assembled FlexCart
Caution:
reservoirs from the solvent tray before moving the cart.
Caution:
moving it.
Caution:
move the cart by pushing on them.
Once it is assembled, you can move the cart to other areas of a lab to minimize
tubing runs between the ACQUITY UPLC instruments and a mass
spectrometer. Use the lip on top of the cart to pull it.
To avoid spills of damaging solvent, remove all solvent
To avoid striking low doorways, lower the cart fully before
To avoid toppling the instruments stacked on the cart, do not
TP02500
Moving the assembled FlexCart
Release bar
Lock pedal
July 7, 2014, 715003736IVD Rev. C
95
Advertisement
Table of Contents
Need help?
Do you have a question about the ACQUITY UPLC I-Class IVD and is the answer not in the manual?