Table of Contents
Advertisement
Dry time
Unattended prints might require drying time to prevent the ink from smearing
when the image touches the takeup roll or previously printed images. In addition,
you may want to change drying time depending on the media you are using, the
ambient temperature and the humidity. Dry Time values range from 10 seconds
to 60 minutes. When the Dry Time has expired, the printer rolls or cuts the
image and begins printing the next image in the buffer.
To set the dry time
1
Press Setup/Ink Option/Dry Time.
2
Choose a time from 10 seconds to 60 minutes.
3
Press OK.
Dryer On/Off
The dryer installed at the base of the printer stand helps to dry ink.
To enable the dryer
1
Press Setup/Ink Option/Dryer.
2
Choose On.
3
Press OK.
LCD Contrast
The LCD Contrast function lets you adjust the brightness of the control panel.
The range is 1-16, where 16 is less contrast. The default is 9.
To set LCD contrast
1
Press Setup/User Setup/LCD Contrast.
2
Choose the contrast value.
3
Press OK.
1500 TX User's Guide
Printer Options 3-11
Advertisement
Table of Contents
