Film Technical Information
Environmental Impact
Product Regulations
OSHA MSDS
DOT
Use permits
Disposal* Regulations
EPA
DOT
Note: There is no SUPERFUND liability with DryView Laser Imaging Film.
* State and local laws vary. Consult appropriate regulations or authorities prior to disposal.
Storing and Handling
Undeveloped Film
5-2
Tests show that DryView Laser Imaging Film is not considered hazardous to
the environment. As a result, you can develop, recycle, and dispose of film
with less impact on the environment than if you were using wet-developed
silver halide films.
DryView Laser Imaging Film
US Environmental Regulations Comparison
Wet Silver Halide
Developer
Fixer
Required
Required
Hazardous
Hazardous
Local
Local
Hazardous
Hazardous
Hazardous
Hazardous
To achieve consistent results up to the expiration date indicated on the film
package, DryView Laser Imaging Film must be stored in a cool, dry place
(41° to 77°F / 5° to 25°C) and protected from radiation and chemistry
fumes.
The film can withstand short-term temperature spikes (up to 95°F/35°C) for
several hours during transit without any significant effect on film quality or
performance. Transit temperatures above 95°F/35°C will gradually diminish
shelf life.
Wash
Film
Not required
Not required
No limits
No limits
None
None
No
No
No
No
8F927
DryView Film
Film
Provided
No limits
None
No
No
January 17, 2007