Lan Ports Specifications And Pinouts; Port Specifications; Port Pinouts; Table 6. Lan Port Specifications - Allied Telesis AT-TQ6602 GEN2 Installation Manual

Appendix A: Technical Specifications

LAN Ports Specifications and Pinouts

Port
Specifications

Port Pinouts

58
The access point port specifications are shown in Table 6.

Table 6. LAN Port Specifications

Connector
PoE standard - LAN1 and LAN2
The pin signal definitions for ports LAN1 and LAN2 are given here. Figure
31 illustrates the pin layout of the ports.
Figure 31. Pin Layout for RJ45 Connector on LAN Port
Table 7 lists the pin signals.

Table 7. Pin Signals for 100M/1G/2.5G/5G Base-T Connectors

100 Mbps
Pin
MDI Signal
1 TX+
2 TX-
3 RX+
4 Not used
5 Not used
6 RX-
7 Not used
8 Not used
Specification
IEEE 802.3at (class 4)
100 Mbps
1G/2.5G/5G Signal
MDI-X Signal
RX+ Bi-directional pair A+
RX- Bi-directional pair A-
TX+ Bi-directional pair B+
Not used Bi-directional pair C+
Not used Bi-directional pair C-
TX- Bi-directional pair B-
Not used Bi-directional pair D+
Not used Bi-directional pair D-