Table of Contents
Advertisement
Management Tools
Web Browser
Vista Manager
EX and AWC
Plug-in
SNMPv1 and v2c
The access point supports the following management tools.
The access point has a web browser management interface for
configuring the device from your management workstation. The web
browser interface allows you to manage one unit at a time and supports
both non-secure HTTP and secure HTTPS management sessions. The
default is HTTP. The product has been tested with Microsoft Internet
Explorer version 11 or later, Microsoft Edge, and Chrome.
The access point supports Vista Manager and the Autonomous Wave
Control (AWC) plug-in. Configuring and monitoring large numbers of
devices is simplified with AWC because you can add multiple devices to
management groups and manage them as one unit. The application can
also monitor the operations of the access points and automatically adjust
operating properties to optimize the performance of your wireless network.
Note
The Channel Blanket feature requires Vista Manager EX and the
AWC plug-in.
You can use SNMPv1 or SNMPv2 to view the parameter settings of the
device. The MIB is available from the Allied Telesis web site. For
instructions on how to configure the unit for SNMP, refer to Allied Telesis
TQ6000 GEN2 Wireless Access Points Management Software User's
Guide.
Note
The access point does not support SNMPv3 or the AT-UWC
Wireless LAN Controller.
Chapter 1: Product Description
23
Advertisement
Table of Contents
