Safety Guidelines - INVT Goodrive100 Series Instruction Manual

Goodrive100 inverters
Symbols
Warning
Do not
Hot sides
Note

1.3 Safety guidelines

 Only qualified electricians are allowed to operate on the inverter.
 Do not carry out any wiring and inspection or changing components when the power
supply is applied. Ensure all input power supply is disconnected before wiring and
checking and always wait for at least the time designated on the inverter or until the DC
bus voltage is less than 36V. Below is the table of the waiting time:
400V
 Do not refit the inverter unauthorizedly; otherwise fire, electric shock or other injury may
occur.
Name
Physical injury or damage to the devices may
Warning
occur if not follow the relative requirements
Electrostatic Damage to the PCBA board may occur if not
discharge follow the relative requirements
Sides of the device may become hot. Do not
Hot sides
touch.
Physical hurt may occur if not follow the
Note
relative requirements
Inverter module
0.75kW-15kW
IKR Aandrijven en Besturen
www.ikr-industries.nl
Safety precautions
Instruction
Minimum waiting time
5 minutes
Abbreviation
Note