INVT Goodrive100 Series Instruction Manual page 128

Goodrive100 inverters
Function
Name
code
The
communication
P14.01
baud ratio of
the drive
Digital bit
P14.02 checkout
setting
Detailed instruction of parameters
can receive the frame, but the salve doesn't answer.
The communication address of the drive is unique in the
communication net. This is the fundamental for the point to
point communication between the upper monitor and the
drive.
Note:The address of the slave cannot set to 0.
Set the digital transmission speed between the upper monitor
and the inverter.
0:1200BPS
1:2400BPS
2:4800BPS
3:9600BPS
4:19200BPS
5:38400BPS
Note:The baud rate between the upper monitor and the
inverter must be the same. Otherwise, the communication is
not applied. The bigger the baud rate, the quicker the
communication speed.
The data format between the upper monitor and the inverter
must be the same. Otherwise, the communication is not
applied.
IKR Aandrijven en Besturen
www.ikr-industries.nl
Keypad operation procedure
Default
Modify
value
○
4
○
1