INVT Goodrive100 Series Instruction Manual page 49

Goodrive100 inverters
Function
Name
code
Motor
P00.15 parameter
autotuning
AVR function
P00.16
selection
Detailed instruction of parameters
decreasing and surge.
The manufacturer has set a reasonable carrier frequency
when the inverter is in factory. In general, users do not need
to change the parameter.
When the frequency used exceeds the default carrier
frequency, the inverter needs to derate 20% for each
additional 1k carrier frequency.
Setting range:1.0~15.0kHz
0:No operation
1:Rotation autotuning
Comprehensive motor parameter autotune
It is recommended to use rotation autotuning when high
control accuracy is needed.
2:Static autotuning
It is suitable in the cases when the motor can not de-couple
form the load. The antotuning for the motor parameter will
impact the control accuracy.
0:Invalid
1:Valid during the whole prodecure
The auto-adjusting function of the inverter can cancel the
impact on the output voltage of the inverter because of the
IKR Aandrijven en Besturen
www.ikr-industries.nl
Keypad operation procedure
Default
Modify
value
◎
0
○
1