INVT Goodrive100 Series Instruction Manual page 42

Goodrive100 inverters
Function
Name
code
Running
commands
P00.02
channel
selection
Max. output
P00.03
frequency
Upper limit of
P00.04
the running
Detailed instruction of parameters
jogging of the multi-function terminals
2:Communication
("LOCAL/REMOT" on)；
The running command is controlled by the upper monitor via
communication
Select the controlling communication command channel of
the inverter.
0:MODBUS communication channel
1:PROFIBUS communication channel
2:Ethernet communication channel
3:CAN communication channel
Note: 1, 2 and 3 are extension functions which can be used
only when corresponding extension cards are configured.
This parameter is used to set the maximum output frequency
of the inverter. Users should pay attention to this parameter
because it is the foundation of the frequency setting and the
speed of acceleration and deceleration.
Setting range: P00.04~400.00Hz
The upper limit of the running frequency is the upper limit of
the output frequency of the inverter which is lower than or
IKR Aandrijven en Besturen
www.ikr-industries.nl
Keypad operation procedure
running command
Default
Modify
value
channel
0
50.00Hz
50.00Hz
○
◎
◎