INVT Goodrive100 Series Instruction Manual page 127

Goodrive100 inverters
Function
Name
code
Speed
P11.14 deviation
detection
Speed
P11.15 deviation
detection time
The
communication
P14.00
address of the
drive
Detailed instruction of parameters
LED tens:
0:Action during the automatic reset
1:No action during the automatic reset
0.0~50.0%
Set the speed deviation detection time.
This parameter is used to set the speed deviation detection
time.
Setting range of P11.08: 0.0~10.0s
P14 Group Serial communication
The setting range:1~247
When the master is writing the frame, the communication
address of the slave is set to 0; the broadcast address is the
communication address. All slaves on the MODBUS fieldbus
IKR Aandrijven en Besturen
www.ikr-industries.nl
Keypad operation procedure
Default
Modify
value
●
10.0%
○
0.5s
○
1