Machine Parking; Transportation Information; Shipping The Carrier-Mounted Weld-Deck; Towing The Carrier - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Machine Parking

Refer to the carrier's Operation and Maintenance Manual for specific machine parking instructions.

Transportation Information

Do not transport the machine with the walkways extended.
Figure 58: Secure walkway using retaining latches.
1. Fold the walkways up, and secure using the retaining latches that are bolted to the underside of the left- and right-hand
side walkways. The rear walkway is latched to the two side walkways.
2. Obey all jurisdictional transportation laws that apply. Refer to the Equipment Information Section of the Weld-Deck's
Operation and Maintenance Manual for Weld-deck weights and dimensions.

Shipping the Carrier-Mounted Weld-Deck

Ship the carrier-mounted machine as per the instructions in the carrier's Operation and Maintenance Manual., keeping in
mind the additional weight of the weld-deck. Note: Refer to the Equipment Information Section of the Weld-Deck's
Operation and Maintenance Manual for Weld-deck weights and dimensions.

Towing the Carrier

Note: DO NOT connect to any part of the weld-deck for towing purposes of any kind. DO NOT connect trailing equipment
to the weld-deck structure.
Refer to the carrier's Operation and Maintenance Manual for correct towing procedures. Connect any trailing equipment to
a carrier-mounted drawbar or to a carrier-mounted hitch on the carrier only.
037-08OP-002D-01
RETAINING
LATCH
037-05-14-001A
RETAINING LATCH
(BOTH SIDES)
037-05-14-004A
S/N CB50600021 – UP (Weld-deck)
RETAINING
LATCH
LATCH BOLTED
UNDERSIDE
037-40-63-115A
037-05-14-005A
70