Load Capacity
The loading at each individual holder set (A), (B), (C), (D) must not be
exceeded. The combined loading (A)+(B)+(C)+(D) must not be
exceeded:
(A) Total Combined load supported at INNER CORD HOLDER SET
(B) Total Combined load supported at MIDDLE CORD HOLDER SET
(C) Total Combined load supported at OUTER CORD HOLDER SET
(D) Total Combined load supported at AIR HOSE HOLDER SET
Figure 6: Slewing Canopy Load Capacity
037-08OP-003B
A
B
A
S/N 037201400021 – UP (T8 Slewing Canopy)
S/N 037200370021 – UP (D6N LGP Slewing Canopy)
C
D
B
C
+
+
+
D
20