Identification Information
Plate Locations and Film Locations
The attachment/component information plate is attached to the component to identify the model name/number and the serial
number. It is not a Product Information Number (PIN). The attachment/component information plate is located on the rear of
the Auto Tie-in Crane Base, below the platform, per the illustration below. For quick reference, record this information in
the spaces that are provided below. The serial number (S/N) and Model name/number (M/N) information is stamped onto
the ID plate. For quick reference, record this information in the spaces provided below:
FORWARD
T12
Figure 11: Attachment/component information plate
27
037202650021 – UP (Auto Tie-in Crane)
037-08OP-004B