Fluid Penetration; Containing Fluid Spillage; Inhalation; Asbestos Information - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Fluid Penetration

Pressure can be trapped in the hydraulic circuit long after the engine has been stopped. The pressure can cause hydraulic
fluid or items such as pipe plugs to escape rapidly if the pressure is not relieved correctly.
Do not remove any hydraulic components or parts until pressure has been relieved or personal injury may occur. Do not
disassemble any hydraulic components or parts until pressure has been relieved or personal injury may occur. Refer to the
Service Manual for any procedures that are required to relieve the hydraulic pressure.
When you check for a leak, use a board or cardboard. Leaking fluid that is under pressure can penetrate body tissue. Fluid
penetration can cause serious injury and possible death. A pin hole leak can cause severe injury. If fluid is injected into your
skin, you must obtain treatment immediately. Seek treatment from a doctor that is familiar with this type of injury.

Containing Fluid Spillage

Care must be taken in order to ensure that fluids are contained during performance of inspection, maintenance, testing,
adjusting, and repair of the equipment. Prepare to collect the fluid with suitable containers before opening any compartment
or disassembling any component that contains fluids.
Obey all local regulations for the disposal of liquids.

Inhalation

Asbestos Information

Equipment and replacement parts that are shipped from Vanguard are asbestos free. Use only genuine OEM replacement
parts. If any replacement parts that contain asbestos are used, follow the manufacturer's handling guidelines and procedures
as outlined in their instruction documentation.
Obey environmental regulations for the disposal of asbestos.
Stay away from areas that might have asbestos particles in the air.

Dispose of Waste Properly

S/N 037201400021 – UP (T8 Slewing Canopy) 10
037-08OP-003B
S/N 037200370021 – UP (D6N LGP Slewing Canopy)