Identification Information; Plate Locations And Film Locations - Ce Mark - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Identification Information

Plate Locations and Film Locations - CE Mark

The attachment/component information plate is attached to the component to identify the model name/number and the serial
number. It is not a Product Information Number (PIN). The attachment/component information plate is located on the front
of the Slewing Canopy Base, below the Slewing Drive, per the illustration below. For quick reference, record this
information in the spaces that are provided below. The Slewing Canopy Attachment is compliant to "2006/42/EC", the serial
number (S/N), Model name/number (M/N), and Manufacture year information is stamped onto the "CE" plate. For quick
reference, record this information in the spaces provided below:
FORWARD
Figure 7: Attachment/component information plate
with CE mark
037-08OP-003B
S/N 037201400021 – UP (T8 Slewing Canopy)
S/N 037200370021 – UP (D6N LGP Slewing Canopy)
FORWARD
T8
"CE"
D6M/N
"CE"
21