Volt Dc System (7) - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

24 Volt DC system (7)

Notice
The Genset Engine operates on a 24Volt DC electric system. This includes the batteries, charging, starter-motor, and control
system. Do not attempt to connect to another system that operates on a different voltage than 24 Volts DC. Read and
understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or
heed the warnings could cause serious injury, or could seriously damage the Genset Engine.
Information message (7) is located on the Genset Enclosure service panel, battery/charging system access.
037-05-05-111A
037-09-50-302A
Figure 7: 24 Volt DC system (7)
12
037-08OP-002D-01 S/N CB50600021 – UP (Weld-deck)