3.1 GENERAL SPECIFICATIONS
DIMENSIONS
•
Width: 27.0 in. (0.69 m)
•
Height: 39.0 in. (0.99 m)
•
Length: 15 ft. 9 in. (4.80 m), stored length.
•
Weight: 3,040 lbs. (1379 kg)
CAPACITY
•
85,000 ft-lbs (11.75 ton-m)
•
Ft-lbs = horizontal distance from centerline of rotation to free hanging weight (feet) x amount of weight (pounds).
REACH
•
Second boom reach: 13 ft. to 22 ft. 2 in.
•
Third boom reach: 22 ft. 2 in. to 30 ft..
CABLE
•
120 ft. (36.6 m) of 7/16 in. (11.1 mm) diameter aircraft quality cable. This cable has a single line breaking strength
of 21,000 lbs. (9,525 kg).
CHASSIS AND MOUNTING REQUIREMENTS
•
33,000 lbs. (14,969 kg) GVWR minimum.
•
1,000,000 in-lbs. Resistive Bending Moment (RBM)
•
7/8", Grade 8-UNF Bolts. Tightened to 501 ft. lbs.
•
13-1/2" Mounting hole to run hydraulic and electrical lines to the crane from the body.
HYDRAULIC REQUIREMENTS
•
15 gpm flow @ 2,750 psi.
•
Pressure and return hoses are not furnished with this crane. The installer must provide hoses and determine
proper lengths at installation.
RETURN LINE: The Return Line from the crane to the reservoir (in compartment) must be -10 SAE
o
100R2 or equivalent. The installer will determine the hose length. Return lines longer than 6 ft. must be
-12 in size. Hose end fittings are -10JIC female swivel.
PRESSURE LINE: The Pressure Line from the pump to the crane must be -8SAE R100R2 or equivalent.
o
The installer will determine the hose length. Hose end fittings are -8JIC female swivel.
ELECTRICAL SYSTEM REQUIREMENTS
•
Voltage: 12 VDC
•
Alternator: 60 amps minimum
•
Battery: 100 minute reserve capacity minimum. Maintenance Type battery
ROTATION
•
370° rotation with electric stop
8