5.4 Display Screen Layout - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

5.4 DISPLAY SCREEN LAYOUT

10
9
8
7
6
1. Capacity – The current load on the boom as a percentage of total capacity. The unloaded value of the boom may
be higher than 0% due to the boom weight beyond the retracted position.
2. Aux – AUX will display on the screen when active.
3. Communication Status – LINKED will display when the remote control is communicating with the crane.
4. Watchdog Timer – The black dot should always be moving in a diagonal. If the timer stops, contact your Auto
Crane representative.
5. Signal Strength and Battery Life – Displays the signal strength coming from the crane. The approximate range
is 300 ft. The battery displays the percent remote control battery life remaining.
6. Mode – Displays the current mode selected. See 5.5 SPEED AND MODE SELECTION for details.
7. Max Speed Setting – Displays the current max speed setting. See 5.5 SPEED AND MODE SELECTION for
details.
8. High Idle – HIGH IDLE will display when activated.
9. Boom Angle – Displays the current boom angle in degrees.
10. Crane Status – Displays the current status of the crane. Alarms will be displayed here.
1
Figure 5. Display Screen Layout
5
19
2
3
4