Guards (Operator Protection) - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Guards (Operator Protection)

There are different types of guards that are used to protect the operator. The machine and the machine application determine
the type of guard that should be used.
A daily inspection of the guards is required in order to check for structures that are bent, cracked or loose. Never operate a
machine with a damaged structure.
The operator becomes exposed to a hazardous situation if the machine is used improperly or if poor operating techniques are
used. This situation can occur even though a machine is equipped with an appropriate protective guard. Follow the
established operating procedures that are recommended for your machine.
20
037202650021 – UP (Auto Tie-in Crane)
037-08OP-004B