Electrical Power Lines; Machine Parking; Sound Level Information; Sound Level Information For Machines In European Union Countries And In Countries That Adopt The "Eu Directives - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Electrical Power Lines

Serious injury or death by electrocution can result if the machine or attachments are not kept the proper distance from
electrical power lines.
Use the following chart as a reference to determine the safe distance from high voltage wires during these conditions:
•
machine operation
•
machine transportation
Table 1: Power lines, minimum clearance

Machine Parking

Refer to the carrier's Operation and Maintenance Manual for specific machine parking instructions.

Sound Level Information

The Slewing Canopy itself does not produce elevated sound pressure levels.
Refer to the carrier's Operation and Maintenance Manual for sound level information.
Sound Level Information for Machines in European Union Countries and in Countries that
Adopt the "EU Directives"
The Slewing Canopy itself does not produce elevated sound pressure levels.
Refer to the carrier's Operation and Maintenance Manual for sound level information for Machines in European Union
Countries and in Countries that Adopt the "EU Directives".
Refer to the carrier's Operation and Maintenance Manual to determine if hearing protection is prescribed for the operator of
the carrier vehicle.

Vibration

When the machine is operated according to the intended use, the vibration data for the carrier-vehicle is unaffected by
attachment of the Slewing Canopy.
037-08OP-003B
When Operating Near High Voltage Power Lines
Normal Voltage (Phase to
Phase)
0 Volts to 50 kVolts
Over 50 kVolts to 200 kVolts
Over 200 kVolts to 350 kVolts
Over 350 kVolts to 500 kVolts
Over 500 kVolts to 750 kVolts
Over 750 kVolts to 1000 kVolts
While in Transit Near High Voltage Power Lines
Normal Voltage (Phase to
Phase)
0 Volts to 0.75 kVolts
Over 0.75 kVolts to 50 kVolts
Over 50 kVolts to 345 kVolts
Over 345 kVolts to 750 kVolts
Over 750 kVolts to 1000 kVolts
S/N 037201400021 – UP (T8 Slewing Canopy)
S/N 037200370021 – UP (D6N LGP Slewing Canopy)
Minimum Clearance
Required
3.05 Meters (10 Feet)
4.60 Meters (15 Feet)
6.10 Meters (20 Feet)
7.62 Meters (25 Feet)
10.67 Meters (35 Feet)
13.72 Meters (45 Feet)
Minimum Clearance
Required
1.22 Meters (4 Feet)
1.83 Meters (6 Feet)
3.05 Meters (10 Feet)
6.10 Meters (20 Feet)
7.62 Meters (25 Feet)
16