Compressed Air Pressure Gauge - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Weld-deck welding package

Table of Contents

compressor when not in use. The air compressor start/stop switch can be left in the on (I) for the duration of a job when the

compressor is in use; it will automatically start-up as soon as the main supply AC circuit breaker (CB 1) is set.

Note: Depending on the compressor run-mode, the compressor will automatically unload or shut-off once the set air-

receiver pressure has been reached; consult the Equipment Operation section of this manual.

Compressed Air Pressure Gauge

Figure 38: Compressed Air Pressure Gauge –Tank mounted

Compressed Air Pressure Gauge — This gauge displays the compressed air pressure, in PSI and in MPa, stored in the air

037-08OP-002D-01

S/N CB50600021 – UP (Weld-deck)

037-43-55-043A

Table of Contents