Crushing Prevention And Cutting Prevention; Oils - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Improperly disposing of waste can threaten the environment. Potentially harmful fluids should be disposed of according to
local regulations.
Always use leak proof containers when you drain fluids. Do not pour waste onto the ground, down a drain, or into any
source of water.

Crushing Prevention and Cutting Prevention

Support the equipment properly before you perform any work or maintenance beneath that equipment. Do not depend on
hydraulic cylinders to hold up the equipment. Equipment can fall if a control is moved, or if a hydraulic line breaks.
Unless you are instructed otherwise, never attempt adjustments while the machine is moving or while the engine is running.
Whenever there are equipment control linkages the clearance in the linkage area will change with the movement of the
equipment or the machine. Stay clear of areas that may have a sudden change in clearance with machine movement or
equipment movement.
Stay clear of all rotating and moving parts.
If it is necessary to remove guards in order to perform maintenance, always install the guards after the maintenance is
performed.
When you strike a retainer pin with force, the retainer pin can fly out. The loose retainer pin can injure personnel. Make sure
that the area is clear of people when you strike a retainer pin. To avoid injury to your eyes, wear protective glasses when you
strike a retainer pin.
Chips or other debris can fly off an object when you strike the object. Make sure that no one can be injured by flying debris
before striking any object.

Oils

Hot oil and hot components can cause personal injury. Do not allow hot oil to contact the skin. Also do not allow hot
components to contact the skin.
S/N 037201400021 – UP (T8 Slewing Canopy) 11
037-08OP-003B
S/N 037200370021 – UP (D6N LGP Slewing Canopy)