Towing The Carrier; Maintenance And Lubrication Section; Lubricant Viscosities; General - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Weld-deck welding package
Table of Contents

Advertisement

Slowly lower the Slewing Canopy until it contacts the tractor-mounted stowing rest.
5. Engage the Stowing Latch Pin through the Stowing Latch. Move the Stowing Latch Pin handle to the LOCKED
position for transport.
6. Ensure the Stowing Canopy is properly secured.

Towing the Carrier

Note: DO NOT connect to any part of the Slewing Canopy or its mounting base for towing purposes of any kind.
Refer to the carrier vehicle's Operation and Maintenance Manual for correct towing procedures.

Maintenance and Lubrication Section

Lubricant Viscosities

General

Follow Carrier Vehicle manufacture's maintenance and lubrication instructions for vehicle service as required.
To prevent corrosion damage to the slewing drive interior, if not used regularly, rotate the slewing canopy between its
limits of travel several times at least once a month.

Selecting the Viscosity

The proper lubricant viscosity grade is determined by the minimum outside temperature. This is the temperature when the
machine is started and when the machine is operated. In order to determine the proper lubricant viscosity grade, refer to the
"Min" column in the table. This information reflects the coldest ambient temperature condition for starting a cold machine
and for operating a cold machine. Refer to the "Max" column in the table in order to select the oil viscosity grade for
operating the machine at the highest temperature that is anticipated.

Lubricant Viscosities for Ambient Temperatures

Compartment or System
Grease Spec
Hydraulic System
Table 2: Lubricant viscosities for ambient temperature
037-08OP-003B
Lubricant Viscosities for Ambient Temperatures
Oil Type and Classification
Mobil Mobilux EP 2
Caterpillar Ultra 5Molly NGLI #0
Caterpillar Ultra 5Molly NGLI #1
Caterpillar Ultra 5Molly NGLI #2
Caterpillar Arctic Platinum NGLI #0
Follow Carrier Vehicle's
Requirements
S/N 037201400021 – UP (T8 Slewing Canopy)
S/N 037200370021 – UP (D6N LGP Slewing Canopy)
STOWING LATCH
PIN LOCKED FOR
TRANSPORT ONLY
Oil Viscosities
°C
°F
Min
Max
Min
Max
-40
50
-40
122
-40
35
-40
95
-35
40
-31
104
-30
50
-22
122
-40
20
-40
68
30

Advertisement

Table of Contents
loading

Related Products for Vanguard CPW 125-4-S Series

Table of Contents