Iso Symbols (Model Usage) - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

ISO Symbols (Model Usage)

The following list contains all of the ISO Symbols that appear in this publication.
On: To identify the on position of a control.
Off: To identify the off position of a control.
Battery Disconnect: To identify the control that disconnects the battery from the electrical system.
Engine Start: To identify the control used to start the engine.
Engine Run: To identify the control position that indicates the engine, once started, will continue to
operate.
Engine Stop: To identify the control used to stop the engine.
Engine-start aid: To identify the control that injects a pressurized ether gas into the combustion
chamber to assist in starting the engine.
Fast Operation: To indicate the fast or rated setting of the machine.
Slow Operation: To indicate the slow or idle setting of the machine.
Pressure vessel: To identify the control for the compressed air (if equipped).
Illumination: To identify the control for illuminating the control display lights.
Battery charging condition: To identify the display that provides information about the battery
charging condition.
Engine Oil: To identify the display that provides information about the oil pressure in the engine
lubrication system.
Engine Coolant Temperature: To identify the display that provides information about the temperature
in the engine cooling system.
Hour meter: To indicate the number of hours the equipment has operated.
Electrical Earth/Ground: Indentifies the Earth/Ground terminal connection.
037-08OP-002D-01 S/N CB50600021 – UP (Weld-deck)
36