Grease Spec - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Grease Spec

There are four places which are lubricated, they are (1)slewing ring ball bearings, (2)worm gear, (3)taper roller
bearings and (4)planetary gears. Slewing drives are supplied fully lubricated.
Table 5: Eco Friendly Grease Specifications
Parts needed to be lubricated
Condition of Lubricate
Recommended Grease
Product name
Applicable temp. range in ºC
Color
Four-ball test
Viscosity (-40 °C, 10 s-1) Pas
Dropping Point °C
Penetration, Worked 0.1 mm
Mobilux EP 2 is a lithium hydroxystearate baesd grease. It's formulated to provide extra protection against wear, rust and
water. It is applied in heavy-duty application where high unit pressures are present. It provides excellent protection
against rust and corrosion.
Mobilux is suitable for the lubrication of enclosed gears and bearings, and for applications where conventional oil cannot be
retained, or should not be used for environmental reasons.
The grease helps to provide reduced wear under heavy load and vibration, protection against rust in the presence of water,
extended bearing life in wet environments.
It meets or exceeds the DIN 51825 (2004-06)
Taper Bearing
Ring raceway
Worm Gear Thread
Pre-lubricated by manufacturer
Mobilux EP 2
-40 to +130C
Brown
250 kg ASTM D 2596
160
190
280
23 | S o l a r S l e w D r i v e M a n u a l