Table of Contents
Advertisement
Preface
The following instructions give you the information you need to be able to correctly install and maintain a KMI
slew drive.
These instructions replace earlier versions. All instructions are provided with a revision number. Installation and
maintenance instructions with previous revision numbers are invalid. The latest version is published on our
homepage and can be downloaded from there (www.kinematicsmfg.com). Please always check that you are
working with the latest revision.
All work steps listed here are to be executed by suitably qualified personnel.
Please do not hesitate to contact our Technical Department for any further assistance.
4 |
S o l a r S l e w D r i v e M a n u a l
Advertisement
Chapters
Table of Contents
Troubleshooting
