5.6 Operation - Valve Override - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

5.6 OPERATION – VALVE OVERRIDE
1. Push the unloader valve (ULV) red button. This will send hydraulic fluid to the valve block.
2. Select the desired function.
3. Close the gap between the collar and the end on the override button.
4. Push or pull the override button for the desired direction of movement. The farther the button is pressed or pulled,
the faster the function will operate.
5. When the manual operation is complete, release the ULV to its original position.
6. Ensure the collar is returned to the locked position. If not, the function may move on its own.
21