Table of Contents
Advertisement
Intended Use
The primary use of this attachment is to lift a lightweight automatic welding-shack or other miscellaneous lightweight
equipment for petroleum-product pipeline construction.
Load Capacity
The machine may tip and personal injury may occur if the maximum load capacities are exceeded. Load capacities
assume that the machine is stationary on a level concrete surface. Lift capacities will decrease on slopes or soft ground.
Figure 8: Auto Tie-in Crane Load Capacity
NOTE: Do not exceed the load capacity that is shown in the chart in illustration above.
24
037202650021 – UP (Auto Tie-in Crane)
037-08OP-004B
Advertisement
Chapters
Table of Contents
Troubleshooting
