Compressed Air Receiver Drain Valve; Compressed Air Supply Line Tee - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Weld-deck welding package
Table of Contents

Advertisement

Compressed Air Receiver Drain Valve

Front
Drain Valve on
underside of deck.
Warning Film on
side of deck.
Warning! Explosion Hazard! Drain Air
Receiver Daily. Failure to drain moisture
will corrode Air Receiver material and
lead to Air Receiver failure. Read and
understand
warnings
Maintenance Manual. Failure to follow
the instructions or heed the warnings
could cause serious injury or death.
Figure 39: Compressed Air Receiver Drain Valve and "Drain Tank Daily" Warning Film
Compressed Air Receiver Drain Valve — The compressed air receiver is fitted with a drain valve on the underside of the
deck. The compressed air receiver drain valve is used to drain water from the air receiver that accumulates during normal
use. The compressed air receiver drain valve is also used to drain the compressed air from the receiver when not in use.
Ensure that compressed air receiver drain valve is closed prior to starting the air compressor.
Note: The compressed air receiver must be fully drained of air at the end of each work day.

Compressed Air Supply Line Tee

Figure 40: Compressed Air Supply Line Tee
037-08OP-002D-01
037-05-05-112A
the
instructions
in
the
Operation
2
1
S/N CB50600021 – UP (Weld-deck)
Left Side
Air Receiver Drain
Valve, shown OPEN
to drain
Left Side
and
Air Receiver Drain
and
Valve shown
CLOSED for
working
037-43-55-043A
FRONT
037-42-55-016A
FRONT
037-42-55-014A
56

Advertisement

Table of Contents
loading

Related Products for Vanguard CPW 125-4-S Series

Table of Contents