Machine Parking; Ransportation Nformation; T8 Slewing Canopy Configure For Transport - Vanguard CPW 125-4-S Series Operation And Maintenance Manual

Machine Parking

Refer to the carrier's Operation and Maintenance Manual for specific machine parking instructions.
Transportation Information
Do not transport the machine with the Slewing Canopy unsecured. Do not transport the machine with the Slewing
Canopy facing forwards.
Note: The total combined weights and Dimensions of the Slewing Canopy, the Carrier Vehicle, and any additional
attachments must be considered when transporting the machine.
Note: The slewing canopy should also be configured for transport whenever the carrier vehicle is being driven from one
location to another whenever the carrier vehicle travels at a speed greater than normal "working" speed. For example, when
being driven from one work area to another, without any welding work being carried out between nearby pipe joints, or
when traveling from one welding set-up site to another.
Transport the machine with the Slewing Canopy facing rearwards, never transport with the Slewing Canopy facing
forwards.
Obey all jurisdictional transportation laws that apply. Refer to the Equipment Information Section (Slewing Canopy) of this
manual for weight and dimension considerations of the Slewing Canopy.

T8 Slewing canopy configure for transport

CENTRE CANOPY
REST AND
STOWING REST
037-20-204
Figure 10: T8 Slewing canopy configured for transport.
1. Ensure that the canopy tarp is tightly secured to the canopy frame; tighten the canopy tarp hold down straps along each
side of the canopy tarp as required.
037-08OP-003B
CENTRE CANOPY
POSITION ON
STOWING REST
037-T8-20-002A
S/N 037201400021 – UP (T8 Slewing Canopy)
S/N 037200370021 – UP (D6N LGP Slewing Canopy)
TIGHTEN TARP
HOLD DOWN
STRAPS
SECURE CANOPY WITH
HOLD DOWN STRAP
FOR TRANSPORT
037-T8-20-001A
037-T8-20-003A
26