First 10 Hours Of Operation; Hours Or Weekly; Grease Universal Joints - Norwood The Grain Handler 8 Operator's Manual

First 10 Hours Of Operation

And Then

50 Hours Or Weekly

Grease Universal Joints

DANGER
NEVER ENTER BIN UNLESS ALL POWER IS LOCKED
OUT AND ANOTHER PERSON IS PRESENT.
Exposed auger and moving parts can cause severe in-
jury or death. Rotating augers are dangerous! Flowing
grain may trap and suffocate.
FAILURE TO HEED THIS WARNING MAY CAUSE SERI-
OUS INJURY OR DEATH.
DANGER
ROTATING AUGER HAZARD KEEP AWAY
To prevent serious injury or death from rotating
augers:
1. Do not enter bin unless power is locked out.
2. Turn machine OFF, shut down and lock out power
source, unplug power cord and wait for all moving parts
to stop before inspecting, servicing or repairing machine.
3. Keep body, hair, and clothing away from moving parts.
4. Stay away from rotating augers. Keep others away.
FAILURE TO HEED THIS WARNING MAY CAUSE
SERIOUS INJURY OR DEATH.
Your equipment can operate at top efficiency, but only if it is
properly maintained at a regular interval.
Use an SAE multipurpose high temperature grease with ex-
treme pressure (EP) performance. Also acceptable, SAE
multipurpose lithium based grease.
5 - MAINTENANCE
Pump until the grease becomes visible.
1. Grease 1 point as indicated by the following symbol
40
gearbox the first 10 hours and then every Week or (50
hours) of use.
2. Grease 1 point as indicated by the following symbol
40
erhead the first 10 hours and then every Week or (50
hours) of use.
Machine is shown with guard removed for illustrative purposes.
• Turn machine OFF, shut down and lock out power source, unplug power cord
and wait for all moving parts to stop before inspecting, servicing or repairing
machine.
• Keep body, hair, and clothing away from moving auger flighting and moving parts.
• Do not operate with any guards removed or modified. Keep guards in good
working order. Failure to comply could result in death or serious injury.
5-7
for the universal joint located on Power Sweep
(See Fig. # 5-3)
10/50
Fig. # 5-3 Grease U-Joint
for the universal joint located on Inclined Pow-
10/50
Fig. # 5-4 Grease U-Joint
DANGER
MISSING GUARD HAZARD