Horizontal Powerhead Installation - Norwood The Grain Handler 8 Operator's Manual

Horizontal Powerhead Installation

The Horizontal Powerhead provides power to the U-Trough
and Power Sweep.
Use the following instructions to install the Horizontal Pow-
erhead.
MODELS:
8" U Trough Powersweeps
802-19-1102U, 802-21-1102U, 802-24-1102U, 802-27-1102U,
802-30-1102U, 802-33-1102U, 802-36-1102U, 802-42-1102U,
802-48-1102U
10" U Trough Powersweeps
102-19-1102U, 102-21-1102U, 102-24-1102U, 102-27-1102U,
102-30-1102U, 102-33-1102U, 102-36-1103U, 102-42-1104U,
102-48-1104U, 102-54-1104U, 102-60-1105U
Estimated Completion Time: 30 Min's.
DANGER
ROTATING AUGER HAZARD KEEP AWAY
To prevent serious injury or death from rotating
augers:
1. Do not enter bin unless power is locked out.
2. Turn machine OFF, shut down and lock out power
source, unplug power cord and wait for all moving parts
to stop before inspecting, servicing or repairing machine.
3. Keep body, hair, and clothing away from moving parts.
4. Stay away from rotating augers. Keep others away.
FAILURE TO HEED THIS WARNING MAY CAUSE
SERIOUS INJURY OR DEATH.
3 - INSTALLATION
NEVER ENTER BIN UNLESS ALL POWER IS LOCKED
OUT AND ANOTHER PERSON IS PRESENT.
Exposed auger and moving parts can cause severe in-
jury or death. Rotating augers are dangerous! Flowing
grain may trap and suffocate.
FAILURE TO HEED THIS WARNING MAY CAUSE SERI-
OUS INJURY OR DEATH.
1. Remove the "U-Trough Tube Rodent Cover" 1 from
the "U-Trough" 2 save the (Qty. 4) "1/2-13 X 1 Bolts"
3 , & "1/2-13 Nuts" 4 for later.
2
3
Fig. # 3-37 Remove U-Trough Rodent Cover Step # 1
3-17
DANGER
(See Fig. # 3-37)
1
4