Norwood The Grain Handler 8 Operator's Manual page 68

6. Loosen (Qty. 4) "3/8"-16 Jam Nuts" 5 and "3/8"-16 x
1-3/4 Bolts" 6 from the "Backboard Extension" 7
(See Fig. # 3-69) (See Fig. # 3-70)
7
Fig. # 3-69 Remove Old Drive Wheel (Standard Drive
If you are switching from the Buzz Wheel Drive Wheel
Option to the Standard Drive Wheel Option or the other
way around, the dis-assembly is the same with the excep-
tion of the weight difference.
# 3-70)
Fig. # 3-70 Remove Old Drive Wheel (Buzz Wheel)
6
5
Wheel)
NOTE
(See Fig. # 3-69) (See Fig.
6
5
7
3 - INSTALLATION
7. Loosen the (Qty. 2) "3/8"-16 Jam Nuts" 8 and "3/8"-16
x 1-3/4 Bolts" 9 securing the "Drive Wheel Flighting
Auger Shaft" 10 to "Power Sweep Flighting Auger
Shaft" 11 .
Fig. # 3-71 Remove Old Drive Wheel (Buzz Wheel)
3-28
(See Fig. # 3-71)
10
9
8
11