100 Hours Or Monthly; Check The Gearbox Oil Levels - Norwood The Grain Handler 8 Operator's Manual

100 Hours Or Monthly

Check The Gearbox Oil Levels

Lower Gearbox
1. Ensure the grain bin is completely empty of all product.
2. Remove the Power Sweep by following the instructions
in reverse assembly order on the following pages...
(Steps 24, thru. 29).
Page # 3-9)
3. Remove the (Qty. 4) "5/16"-18 x 7/8 Bolts" 1 , and the
"U-Trough Gearbox Cover" 2 .
1
2
Fig. # 5-10 Remove Bolts & Gearbox Cover
4. Re-install the (Qty. 4) "5/16"-18 x 7/8 Bolts" 1 back
onto the "Lower Gearbox Cover" 3 .
Fig. # 5-11 Re-Install Bolts
5 - MAINTENANCE
(See
(See Fig. # 5-10)
(See Fig. # 5-11)
1
3
5-11
IMPORTANT
Failure to re-install the lower gearbox cover bolts could
cause the cover to come off the gearbox and spill oil, and
loss of internal gearbox components.
5. Remove the "1/8" X 2 Hairpin" 4 & "3/8" Flat Washer"
5 from the "Gearbox Shifter Rod" 6 .
5
6
Fig. # 5-12 Removing Gearbox
6. Remove the (Qty. 4) "3/8"-16 X 1 Bolts" 7 , and the (Qty.
4) "3/8" Split Lock Washers" 8 .
7
7
Fig. # 5-13 Removing Gearbox
(See Fig. # 5-12)
4
(See Fig. # 5-13)
8
7
7
8