Safety Features - Norwood The Grain Handler 8 Operator's Manual

Safety Features

In addition to safety features shown here, other components,
systems, safety decals on the machine, safety messages, and
instructions in the Operator's manual contribute to the safe
operation of this machine when combined with the care and
concern of a capable operator.
A Hopper Gate Control: When the "Intermediate Hopper
Gates" B are opened, the hopper controls have a mech-
anism incorporated in the design that prevents the "Center
Hopper Gate" C to be closed while the "Intermediate
Hopper Gates" B are open. This helps prevent uneven
grain unloading.
2 - SAFETY INFORMATION
C
Fig. # 2-39 Safety Features Power Sweep
Fig. # 2-40 Safety Features Power Sweep
2-27
Only when grain stops flowing from the center hopper can
the intermediate hopper gates be opened. Always load and
unload grain from the center of the grain bin.
Failure to maintain even grain height around walls can
cause structural failure of the bin and result in serious
injury, death or property damage.
A Hopper Gate Control
B