Safety Decals - Norwood The Grain Handler 8 Operator's Manual

Safety Decals

The following safety decals are placed on your machine as a guide for your safety and for those working with you. Walk around
the machine and note the content and location of these safety decals before operating your machine.
Keep safety decals clean and legible. Clean safety decals with a soft cloth, water, and a gentle detergent. Do not use solvent,
AR
N I gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage or remove safety decals.
Replace all safety decals that are damaged, missing, painted over, or illegible. If a safety decal is on a part that is replaced,
make sure the safety decal is installed on the new part. See your dealer for replacement safety decals.
Safety decals that display the "Read Operator's Manual" symbol are intended to direct the operator to the operator's manual
for further information regarding maintenance, adjustments, or procedures for particular areas of the machine.
When a safety decal displays this symbol, refer to the appropriate page of the operators manual.
Safety Decal Locations
7
4
13
12
4
6
Fig. # 2-7 Safety Decal Locations (Horizontal Powerhead & Standard Drive Wheel Option)
Part
Item
Number
1 90-44-0582 Decal, Warning Safety Information Power Sweep
2 90-44-0011 * Decal, Danger Never Enter Bin (Large)
3 90-44-0012 Decal, Danger Never Enter Bin (Small)
4 90-44-0578 Decal, Rotating Parts Hazard-Auger
5 90-44-0021 Decal, Danger Missing Guard (2 x 3.5)
6 90-44-0167 Decal, Rotating Parts Hazard
* Not shown In this view
2 - SAFETY INFORMATION
7
5
3
14
15
1
Description
7
Part
Qty. Item
Number
1 7 90-44-0359
2 8 90-44-0221 Decal, Buzz Saw Shear Bolt (Option)
1 9 90-44-0579 Decal, Warning Bin Unloading Instructions
2 10 90-44-0580 Decal, Operating Instructions - Bin Unloading
2 11 90-44-0581 Decal, Operating Instructions - Power Sweep
2 12 90-44-0583
2-13
7
DANGER
MISSING GUARD HAZARD
Machine is shown with guard removed
for illustrative purposes.
• Turn machine OFF, shut down and lock
out power source, unplug power cord
and wait for all moving parts to stop
before inspecting, servicing or repairing
machine.
• Keep body, hair, and clothing away from
moving auger flighting and moving parts.
• Do not operate with any guards removed
or modified. Keep guards in good work-
ing order. Failure to comply could result
in death or serious injury.
Description
Decal, Rotating Auger Hazard Keep Away
Decal, Operating Instructions-Power Sweep Engage-Dis
Qty.
3
1
1
1
1
1