5.0 Maintenance; General Maintenance Safety; Practice Safe Maintenance; Work In Clean Area - Norwood The Grain Handler 8 Operator's Manual

Table of Contents

Advertisement

5.0 MAINTENANCE

General Maintenance Safety

1. Review the Operator's Manual and all safety items before
working with, maintaining or operating the Power Sweep.
2. Disconnect and lockout power supply, and wait for all mov-
ing parts to stop before servicing, repairing or unplugging
any area of the machine
3. Keep hands, feet, hair and clothing away from all moving
and/or rotating parts
4. Do not attempt to clean, lubricate, clear obstructions or
make adjustments to the machine while it is in motion or
while the equipment has power.
5. Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools
are properly grounded.
- Use adequate light for the job at hand.
6. Clear the area of bystanders, especially children, when
carrying out any maintenance and repairs or making any
adjustments.
7. Before resuming work, install and secure all guards when
maintenance work is completed.
8. Keep safety decals clean. Replace any decal that is
damaged or not clearly visible.
9. Always make sure working area is clear of
tools, parts, other persons and pets before
you start operating the machine.
10. Chock wheels on towed implements that are staged with
the Power Sweep.
5 - MAINTENANCE

Practice Safe Maintenance

Understand service procedure before doing work. Keep area
clean and dry.
Never lubricate, service, or adjust machine while it is moving.
Keep hands, feet, and clothing away from power-driven parts.
Disengage all power and operate controls to relieve pressure.
Lower equipment to the ground. Stop the engine. Remove
the key. Allow machine to cool.
Securely support any machine elements that must be raised
for service work.
Keep all parts in good condition and properly installed. Fix
damage immediately. Replace worn or broken parts. Remove
any buildup of grease, oil, or debris.
On self-propelled equipment, disconnect battery ground
cable (-) before making adjustments on electrical systems or
welding on machine.
On towed implements, disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine.
Falling while cleaning or working at height can cause serious
injury. Use a ladder or platform to easily reach each location.
Use sturdy and secure footholds and handholds.

Work in Clean Area

Before starting a job:
• Clean work area and machine.
• Make sure you have all necessary tools to do your job.
• Have the right parts on hand.
• Read all instructions thoroughly; do not attempt shortcuts.
5-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

The grain handler 10

Table of Contents