Norwood The Grain Handler 8 Operator's Manual page 102

Table of Contents

Advertisement

7. Remove gearbox from U-Trough.
Fig. # 5-14 Remove Gearbox From U-Trough
8. Check the level when the oil is cold by removing the cap
from the reservoir.
(See Fig. # 5-15)
Ceck Gearbox
Oil Level (Either
Side)
Fig. # 5-15 Check Gearbox Oil Level
FMO-90-AW Oil Reservoir Capacity
Ounces
10.5
9. Use an a SAE food grade gear oil (FMO-90-AW) for all
operating conditions.
5 - MAINTENANCE
(See Fig. # 5-14)
Liters
.310
5-12
10. Fill the reservoir so that oil reaches the bottom of the
threads.
11. Rotate the auger flighting to remove any air inside the
gearbox.
12. Recheck oil level and add as necessary.
13. After filling, close and secure the cap.
14. Using steps 2-7, reassemble gearbox to U-Trough in
reverse disassembly order

Advertisement

Table of Contents
loading

This manual is also suitable for:

The grain handler 10

Table of Contents