Norwood The Grain Handler 8 Operator's Manual page 27

(See Fig. #
2-9)
Fig. # 2-10 Safety Decal Location (Horizontal Powerhead)
2 - SAFETY INFORMATION
• Read and understand the manual before assembling, operating, or main-
taining the equipment.
• Disconnect and lockout power supply and wait for all moving parts to stop
before servicing, adjusting, repairing or unplugging any area of the machine.
• Keep away from all rotating auger flighting to avoid entanglement, which will
result in serious injury or death. Keep others away.
• Always operate with guards, covers, and shields in place.
• Always load and unload grain from the center of the bin. Failure to maintain
even grain height around walls can cause structural failure of the bin and
result in serious injury, death or property damage.
NEVER ENTER A BIN WHEN IT IS BEING LOADED OR UNLOADED.
IF YOU MUST ENTER THE BIN, YOU MUST DO THE FOLLOWING:
• Shut off and lock out all power.
• Use a safety harness and a safety line.
• Station persons outside the grain bin to assist.
• Avoid the center of the grain bin.
• Wear proper breathing equipment.
• SUFFOCATION FROM FLOWING GRAIN
It is extremely dangerous to enter a partially or fully loaded bin. Grain can act
like quick sand and pull the worker under, causing suffocation and death. Grain
is a flowing material and can trap you in seconds causing suffocation and death.
Failure to follow these instructions could result in
structural damage, serious injury, or death.
Fig. # 2-9 Safety Decal P/N 90-44-0582 Qty. 1
Fig. # 2-11 Safety Decal Location (Inclined Powerhead)
2-15
(See Fig. #
2-9)