Standard Or Buzz Drive Wheel Installation - Norwood The Grain Handler 8 Operator's Manual

Table of Contents

Advertisement

Standard Or Buzz Drive Wheel Installation

The following instructions are for installing the "Standard
Drive Wheel" accessory for all models of the Power Sweep
To install the "Standard Drive Wheel", proceed as follows:
If you are switching from the Buzz Wheel Drive Wheel
Option to the Standard Drive Wheel Option or the other
way around, the dis-assembly is the same with the excep-
tion of the weight difference. Installation for the first time is
also the same.
(See Fig. # 3-69) (See Fig. # 3-70)
MODELS:
8" U Trough Powersweeps
802-19-1102U, 802-21-1102U, 802-24-1102U, 802-27-1102U,
802-30-1102U, 802-33-1102U, 802-36-1102U, 802-42-1102U,
802-48-1102U
10" U Trough Powersweeps
102-19-1102U, 102-21-1102U, 102-24-1102U, 102-27-1102U,
102-30-1102U, 102-33-1102U, 102-36-1103U, 102-42-1104U,
102-48-1104U, 102-54-1104U, 102-60-1105U
Estimated Completion Time: 30 Min's.
Parts:
(See Page # 3-38)
REQUIRED TOOLS / SUPPLIES:
(1) Hand Truck
(1) Sawhorse
(1) 9/16" Socket
(1) 9/16" Open End Wrench
(1) 3/8" Ratchet
or
DANGER
NEVER ENTER BIN UNLESS ALL POWER IS LOCKED
OUT AND ANOTHER PERSON IS PRESENT.
Exposed auger and moving parts can cause severe in-
jury or death. Rotating augers are dangerous! Flowing
grain may trap and suffocate.
FAILURE TO HEED THIS WARNING MAY CAUSE SERI-
OUS INJURY OR DEATH.
NOTE
(1) 3/8" Pneumatic or Battery
Powered Impact Wrench
(1) Torque Wrench
(1) Lifting Device
(1) Lifting Strap (100 lb or
greater)
3 - INSTALLATION
ROTATING AUGER HAZARD KEEP AWAY
To prevent serious injury or death from rotating
augers:
1. Do not enter bin unless power is locked out.
2. Turn machine OFF, shut down and lock out power
source, unplug power cord and wait for all moving parts
to stop before inspecting, servicing or repairing machine.
3. Keep body, hair, and clothing away from moving parts.
4. Stay away from rotating augers. Keep others away.
FAILURE TO HEED THIS WARNING MAY CAUSE
SERIOUS INJURY OR DEATH.
SERVICE PROCEDURE:
Preparation:
1. The "Standard Drive Wheel" comes fully assembled and
ready for assembly to the Power Sweep.
Fig. # 3-65 Standard Drive Wheel
2. If assembly needs to take place inside the grain bin, then
follow the safety section
TION" on page 2-1)
3-26
DANGER
(See"2.0 - SAFETY INFORMA-
in the manual before installation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

The grain handler 10

Table of Contents