Norwood The Grain Handler 8 Operator's Manual page 36

Table of Contents

Advertisement

2 - SAFETY INFORMATION
OPERATING INSTRUCTIONS
STEP 1 - Open center hopper gate first, unload until grain flow stops. Only when NO grain remains
above the center hopper can the intermediate hopper gate(s) be opened.
STEP 2 - Open the intermediate hopper gate(s) until grain flow stops.
STEP 3 - Stop the motor, engage the bin sweep gearbox lever to remove the remaining grain.
STEP 4 - Close all hopper gates and empty the remaining grain from the u-trough.
STEP 5 - Stop the motor, disengage bin sweep gearbox lever, return bin sweep over the hoppers.
STEP 6 - The grain bin is now ready to be refilled.
Fig. # 2-33 Informational Decal P/N 90-44-0580 (Qty. 1)
(See Fig.
# 2-33)
Fig. # 2-34 Informational Decal Location
2-24

Advertisement

Table of Contents
loading

This manual is also suitable for:

The grain handler 10

Table of Contents