Norwood The Grain Handler 8 Operator's Manual page 61

E
Fig. # 3-50 Schematic: Electric Motors
-
-5/16"
Fig. # 3-51 Schematic: Motor Mounting Base Plate
D
E
2F
-
-
3 - INSTALLATION
14. Start with the "Motor Mount Pivot Pin" 53 in Position
# 2.
(See Fig. # 3-53)
15. To change to a different position, rotate the "Motor Mount
Lock" 54 and lift up the "Motor Mount Base" 55 .
Fig. # 3-52)
54
Fig. # 3-52 Motor Mounting Base Raising / Lowering
16. Remove "Hair Pin" 56 and slide the "Motor Mount Pivot
Pin" 53 out of position.
-
-
Fig. # 3-53 Motor Mounting Base Raising / Lowering
3-21
55
(See Fig. # 3-53)
53
56
Position 4
Position 3
Position 2
Position 1
(See