Norwood The Grain Handler 8 Operator's Manual page 72

16. Using a "Hand Truck" 3 , lift the Power Sweep slightly
and make a complete 360° rotation around the Grain Bin
making sure the "Drive Wheel" 17 does not interfere
with either the "Grain Bin Wall" 16 or any "Grain Bin
Hardware" 18 .
(See Fig. # 3-78)
16
17
Fig. # 3-78 Installing New Standard Drive Wheel Flighting
Extension (Step 5)
17. If "Drive Wheel" 17 interferes with the "Grain Bin Wall"
16 , then loosen the (Qty. 4) "3/8"-16 x 1-3/4 Bolts" 6
and adjust the "Standard Drive Wheel & Flight Exten-
sion" 14 inward towards the center of the Grain Bin.
(See Fig. # 3-80)
6
Fig. # 3-79 Installing New Standard Drive Wheel Flighting
Extension (Step 6)
3 - INSTALLATION
3
6
18. If "Drive Wheel" 17 interferes with the "Grain Bin
Hardware" 18 , then cut or grind the grain bin hardware
as needed for drive wheel to clear.
Fig. # 3-80 Installing New Standard Drive Wheel Flighting
Extension (Step 7)
IMPORTANT
Damage to either the Standard Drive Wheel or the Buzz
Drive wheel by interfering bin hardware will void the man-
ufactures warranty.
3-32
17
16
18